Related Manuals for GABOR TM-UL/UNIVERSAL
Summary of Contents for GABOR TM-UL/UNIVERSAL
- Page 1 TM-UL / UNIVERSAL TILTING WALL MOUNT for Large Flat-Panel Displays IV ER SA L TM -U L / UN AL L MO UN TI LT IN G W User Manual...
- Page 2 Thank you for choosing Gabor. The Gabor TM-UL Universal Tilting Wall Mount offers compatibility with a wide range of screen sizes measuring 42 to 90 inches and provides a slim mounting depth of 2.2 inches away from the wall. This durable and discreet support holds large flat-panel displays weighing up to 176 pounds and offers a tilting range of 15°...
-
Page 3: Safety Warnings
• This product may contain small parts which can possibly pose a professional or installation contractor; Gabor takes no responsibility choking hazard; keep out of reach of children and pets. for any product damage or personal injury resulting from mishandling, incorrect mounting, faulty assembly, or improper use of this product. -
Page 4: Product Specifications
Product Specifications Depth from Mounting Source Tilt angle 2.2 in. (5.6 cm) +5° to -10° Recommended Screen Sizes Material 42 to 90 in. (106.7 to 228.6 cm) Steel VESA Mounting Patterns Wall-plate dimensions 200 × 200 mm 35.25 in. x 8.87 in. (89.5 cm x 22.5 cm) 300 ×... - Page 5 Overview Required Tools Wall Bracket Display Brackets Drill Phillips screwdriver TM-UL / UNIVERSAL / TILTING WALL MOUNT Adjustable crescent wrench Hammer M6,M8 Stud finder M5 × 14 mm screws M6 × 14 mm screws M6 × 30 mm screws M8 × 30 mm screws M8 ×...
- Page 6 Display/TV Placement Before installing the Gabor Tilting Wall Mount, you will need to determine the placement of your display and identify surrounding support structures for attachment. The best height for a display is at the viewer’s eye level. You can find this height in one of two ways.
- Page 7 Attaching the Display/TV Brackets Selecting the Right VESA Mounting Hardware for Your Display A variety of screws are included to fit VESA standards on the backs of most displays. If Your Display Has Recessed Select the M5, M6, or M8 screws and Mounting or a Curved Back: If the screw is washers that best fit your display.
- Page 8 Attaching the Wall Bracket to Wooden Studs Wooden studs run vertically inside the wall, 16 inches apart, behind the drywall or plaster. The wall bracket must be mounted to a wooden stud, or the bracket could fall out and damage your display or cause personal harm. Use a stud finder to locate the Use a 3/16-inch (4.5 mm) wood edges of the wooden stud, and...
- Page 9 Attaching the Wall Bracket to Concrete Warning! Make sure the concrete wall is solid and at least 8 inches (20 cm) thick. If the concrete exhibits cracks or other defects, this may result in failure of the concrete anchors and cause serious personal injury or damage your display. Place the wall bracket template Remove the template and up to the marked locations, and...
- Page 10 Mounting the Display on the Wall Bracket Important! We recommend that two people perform this step. Lift your display up to the wall bracket, and hang the display from the top hooks of the brackets. Use a Phillips screwdriver to tighten the Phillips screws at the bottoms of the display brackets. TM-UL / UNIVERSAL / TILTING WALL MOUNT...
-
Page 11: Adjusting The Tilt Angle
Adjusting the Tilt Angle Use the tilt tension knobs on both brackets to adjust the tension for the tilting mechanisms. Tilt the display to the ideal viewing angle from +5° to -10°, and tighten the tilt tension knobs until secure. -
Page 12: Five-Year Limited Warranty
To obtain warranty coverage, contact the Gabor Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Gabor along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the TM-UL/UNIVERSAL and is the answer not in the manual?
Questions and answers