Connection Setup - Motorola A008 User Manual

Connection Setup

Your device supports more than one ISP connection account. Each connection corresponds to one
profile. Each account will therefore have its own profile.
Connection Setup Terminology
The following list defines the parameters that need to be set up to enable your Internet
Connection.
•
Query Profile:
This defines whether you want to choose a connection profile of your own or use a default
connection profile. This option therefore has two settings, on or off.
Tap On to choose a profile from a list of connection profiles that are associated with your ISP
accounts.
Tap Off and the phone will choose the default connection profile.
•
Profile Name:
This is a unique name you define for each ISP account. This information will not be sent to your
ISP.
•
Dial In Number:
When you use this profile to connect to the Internet, your phone will use this dial in number to
initiate the call.
•
User name:
This is the user name of the ISP account. When your phone dials using the above dial in
number and the call is connected, this user name will be sent to the server to identify you. Your
ISP will give this user name when you apply for Internet service.
•
Password:
It is used in conjunction with the user name for your identification when connecting to the
Internet. After dialling the dial in number, this password will be sent to the server as well.
! User name and Password are the only two parameters that the ISP Server needs to identify you.
Please make sure that you correctly enter the user name and password in the profile, otherwise
the server will reject you.
•
Baud Rate:
This is the data transfer rate when connecting with your ISP. Please refer to your ISP the correct
value for this parameter.
•
Line Type:
This is the type of line you are using to connect to the ISP server. Please refer to your ISP to get
the correct line type.
System Setup 209