Performing Data Synchronisation - Motorola 388 User Manual

Performing Data Synchronisation

If a cable is to be used for the connection between the PC and the device,
make sure a Motorola Data cable is connected to the COM port of the PC.
If Infrared connection is used for data synchronisation, make sure that IrDA
is installed correctly.
Not all the PC's have Infrared capability.
A
1 Run the synchronisation software.
2 Tap at the main menu to enter the Synchronise display.
3 If the serial cable is used, tap Data Cable. Phone will show Ready.
4 You may start synchronisation.
5 If you are using Infrared connection, tap Infrared Link and phone will
show Looking for Computer. Synchronisation will start once the
phone can detect the computer.
Synchronize
Looking for
Computer...
Cancel
If synchronisation was unsuccessful, error messages will be displayed.
198 Data Synchronisation with PC
12:26
Synchronize
Synchronize Via:
Data Cable
InfraRed Link
Done
12:26
Synchronize
100
Sync
0
Ready
Cancel
Cancel
Done Done
12:26
300
Sync
0