Connecting To Internet - Motorola 388 User Manual

Connecting to Internet

Your device allows you to configure and use more than one ISP account to
connect to the Internet. Each one will have its own profile settings. When
you choose a particular account, it means that you want to connect to the
Internet by using the dial-in number specified in that account's profile. After
having connected, the user name and password will be sent to the ISP server
for identification. If you are using GPRS for connection, then you will use
other method to connect to the Internet instead of using the dial-in number.
Please refer to Connection Setup Under Internet Setup in System Setup for
more information on setting up your Connection profile.
1 Tap at the main menu.
Browser
If you set Query Profile OFF at Browser Setup, the phone will try to
connect to the Browser using the default settings you defined at
Browser Setup. You will see the following display.
If the dialling is successful and you have already pre-entered name and
password, you will see confirmation displays:
Verifying
User Name and
Password...
Cancel
If you have selected Query at Logon in your profile under connection setup, a
display will be showing to let you enter User name and password after
connection has been made. For example, it will look like the display as shown
below. The appearance of the screen all depends on the ISP. You can use either
Handwriting Recognition or other methods of entry to enter the correct user
name, then press OK. Password prompt will then appear to let you enter the
correct password. Press OK after that. If verification succeeds, you can then
press DONE to continue and connection will be established.
2 If you set Query Profile ON at Browser setup, you will be presented with
the Select Profile display.
140 WAP Browser
Calling...
Cancel
Connected
OK