Turning Your Device On - Pda Mode; Complete Process Of Turning On Your Device - Motorola 388 User Manual

Table of Contents

Advertisement

Turning Your Device On - PDA Mode

1
Open the flip then press the Power button and hold the button for
about 4 to 5 seconds (until the screen shows the mode of operation in
the dialogue box) before releasing the button.
2
Select Antenna Off to turn off Phone Mode and select PDA Mode;
under this mode, you cannot make phone calls and send messages.
3
Then press Done to confirm your selection.
Besides using the above method to activate the PDA mode, you can also
A
refer to the "Complete Process of Turning On the Phone" to activate the
PDA mode.

Complete Process of Turning On Your Device

If you have pre-set the PIN, phone number lock or the device is preset with
manual network selection (refer to System Setup), you will need a few more
steps to turn Phone Mode ON. But it also enhances the security of your
phone and the versatility of its functions.
Open the flip then press the Power button and hold the button until the
screen shows the Phone Mode dialogue box, then release.
If the SIM card is not inserted, locked, not registered or damaged, the screen
will show the following 2 selections:
24 Getting Started
Phone Mode
Antenna Off
Antenna On
Done

Advertisement

Table of Contents
loading

Table of Contents