Table of Contents
Advertisement
4
Tap on the field after Nickname and enter your email user name.
5
Tap on the field after Port and enter the TCP port number. Default
setting is 25.
Your email Service Provider should provide this number.
A
6
If Authentication is required by your service provider for connection to
their SMTP server, select Authentication On. If Authentication is not
required by your service provider, select Authentication Off.
7
If Authentication is Off, go on to Step 11.
8
Check the box for Same as Receive Setup and User Name and Password
will be dimmed. Then User Name and Password will be the same as the
POP3 or IMAP server.
9
If there is a separate User Name and Password, tap the input field beside
User Name to input the User name.
10 Tap the input field beside password to input the password.
11 Tap OK to finish the Mailbox Send Setup and return to the Mailbox
Setup Display.
! Some email Service Providers require authentication for using their SMTP
server. Hence, step 6-10 will be necessary in order to send out email
successfully. Please refer to your email Service Provider to confirm if this
authentication is required.
264 System Setup
Advertisement
Table of Contents
