Motorola 388 User Manual page 267

5 Tap on the field below the Profile Name and using the stylus, enter the
Profile Name that will appear in the Connection Setup display.
6 Tap on the field below Dial-in Number to enter the dial-in number that
allows your device to be connected to the Internet.
If Query at Logon is selected by checking the (box Icon), then the User Name
and Password mentioned below will be gray out and no need to enter the
value for these two parameters.
After connection has been established, network server will prompt you to
enter the User Name and Password manually for authentication.
7 Tap on the field below User Name to enter your login user name for
connecting to the Internet.
8 Tap on the field below Password to enter the password for connecting
to the Internet. For reconfirmation, the phone will require you to enter
the same password twice.
9 Tap on the pull-down selection box under Baud rate to select the data
transfer speed. There are 3 speeds for you to choose from:
•
2400 bps
•
4800 bps
•
9600 bps
10 Tap on the Line Type: pull-down selection box to choose whether to
use Modem or ISDN to connect to the Internet.
11 Tap OK to finish set up and return to the Connection Setup display.
If you select GPRS in Step 4, you don't need to input the Dial-in Number
A
for Internet connection in the subsequent procedure. Instead, you
should input a corresponding website in the line below Access Pt.
Name, User name and Password.. There will be no Line Type and
Baud Rate parameter for you to input.
System Setup 257