Table of Contents
Advertisement
! Like a bank or credit card, you should keep your SIM card secure. Do not
bend or scratch your card and avoid exposure to static electricity or
water.
! Switch off your phone before inserting or removing the SIM card. Failure
to do so may damage the memory of your SIM card.
1
Press and hold the Power button to turn off your phone.
2
Pull upwards the battery release latch, the battery will automatically pop
up.
3
Slide the SIM holder towards the right and lift up the left side of the
holder.
4
To insert the SIM card, slide it into the holder with the notch at the top
and facing towards the base of the device.
5
To replace the holder, press and slide it to the left to lock it in place.
6
To replace the battery, insert it, printed arrows first, into the
compartment. Align the connections on the battery with the
connections on the device (without a fullstop) and push down.
After inserting the SIM card, turn on the device. If the SIM card is inserted in
the wrong way round, damaged or there is no SIM, the "No Sim" message
may be displayed. Remove the SIM card, check that it is the right way round
and then re-insert it into the phone. If either of the Bad Card See Supplier,
or Blocked See Supplier messages are displayed, then you will need to
contact your Cellular Service Provider.
18 Getting Started
Advertisement
Table of Contents
