Advertisement
SDI
Operation
This unit is designed to operate only with a 110 VAC power source. For
conversion to a different voltage of operation contact SDI. To operate the unit,
locate the power entry module on the rear of the enclosure and connect the power cord.
Plug the unit into an appropriate power outlet. A red LED on the front panel labeled
"POWER" will turn on. Attach the signal to be distributed to one of the SMA input
connectors on the front panel. Any HPDA output may be used to drive the input of
another distribution module.
Copyright © SpectraDynamics, Inc. 1999
6
Advertisement
Need help?
Do you have a question about the HPDA15-RM-B and is the answer not in the manual?