Subscribe to Our Youtube Channel
Related Manuals for ITRON G5R1
Summary of Contents for ITRON G5R1
- Page 1 G5R1 Module for the Itron Electricity Meter Technical Reference Guide Effective Date: June, 2020 G5R1 Communications Module...
-
Page 2: Revision History
Revision History The following table describes the changes to this document for each revision of the CAT1 module: Revision Date Description of Change June, 2020 Initial Release G5R1 Communications Module... -
Page 3: Regulatory Compliance
Labeling The following requirements will be applied to any products that use these modules: The GEN5 RIVA meter or host label will include the following text for the G5R1 module: Contains: • • FCC ID: SK9G5R1, IC: 864G-G5R1, Model: G5R1 The user’s manual for any product that contains this modules will contain the following text. - Page 4 Additional testing, Part 15 Subpart B disclaimer The Itron G5R1 modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
- Page 5 G5R1 has been tested and has shown compliance within the host. Antennas There are no external antenna types approved for use with the Itron G5R1 module installed in the Itron meter. Below are the antennas associated with the G5R1 module.
-
Page 6: Recycling Information
Unauthorized repair will void the warranty and/or maintenance contract with your company. Operational Description The Itron G5R1 is a communications module which utilizes a 900 MHz and a 2.4 GHz Wi-Fi transmitter. This module operates within a host unit which is part of a utility network system designed to communicate with other devices in this network such as electricity meters and routers. -
Page 7: Installation
The G5R1 module will be assembled into Itron meters. In the following picture, shown are G5R1 register board module, the display, and a plastic cover. The plastic cover and LCD will be assembled onto the back side of the register board module. - Page 8 Assemble the G5R1 module with metrology base. In the following picture, a 2S base is shown. G5R1 Communications Module...
- Page 9 The G5R1 module and metrology base were connected a board to board connector. G5R1 Communications Module...
- Page 10 Cover up the plastic to complete the assembly: G5R1 Communications Module...
Need help?
Do you have a question about the G5R1 and is the answer not in the manual?
Questions and answers