Table of Contents
Advertisement
Quick Links
DE
BETRIEBSANLEITUNG
Übersetzung / Translation
EN
USER MANUAL
CZ
NÁVOD K OBSLUZE
SK
NÁVOD NA OBSLUHU
ES
INSTRUCCIONES DE SERVICIO
FR
MODE D'EMPLOI
SL
NAVODILA ZA UPORABO
Edition: 24.06.2021 – Revision 00 – TrT – DE/EN/CZ/SK/ES/FR/SL
ZI-EWB500
EAN: 9120039233635
ELEKTRISCHE SCHUBKARRE
ELECTRIC WHEELBARROW
ELEKTRICKÉ MOTOROVÉ KOLEČKO
ELEKTRICKÉ MOTOROVÉ KOLIESKO
CARRETILLA ELÉCTRICA
BROUETTE ÉLECTRIQUE
ELEKTRIČNA SAMOKOLNICA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zipper Mowers ZI-EWB500
Summary of Contents for Zipper Mowers ZI-EWB500
- Page 1 ELECTRIC WHEELBARROW NÁVOD K OBSLUZE ELEKTRICKÉ MOTOROVÉ KOLEČKO NÁVOD NA OBSLUHU ELEKTRICKÉ MOTOROVÉ KOLIESKO INSTRUCCIONES DE SERVICIO CARRETILLA ELÉCTRICA MODE D'EMPLOI BROUETTE ÉLECTRIQUE NAVODILA ZA UPORABO ELEKTRIČNA SAMOKOLNICA ZI-EWB500 EAN: 9120039233635 Edition: 24.06.2021 – Revision 00 – TrT – DE/EN/CZ/SK/ES/FR/SL...
-
Page 2: Dear Customer
This operating manual contains information and important notes for safe commissioning and handling of the electric wheelbarrow ZI-EWB500, hereinafter referred to as "machine". The manual is an integral part of the machine and must not be removed. Keep it for later use in... -
Page 3: User Requirements
• Ensure sufficient lighting conditions at the workplace to ensure safe handling of the ma- chine. • Remove tool keys and other adjustment tools before switching on the machine. ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU... -
Page 4: Special Safety Instructions For This Machine
(plastic bag, box) or the contacts must be taped. Never open the battery. • 11.5 Hazard warnings Despite their intended use, certain residual risks remain. Due to the structure and construction of the machine, hazardous situations may occur when handling the machines: ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU... -
Page 5: Assembly Steps
Do not fully tighten all screws until assembly is complete. Step Assemble the left (L) and right handle (R) to the frame (1) using one hex screw (4), two washers (5), one spring washer (6) and one nut (7) each. ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU... - Page 6 (4) each. Step Fasten the cable (1) of the motor wheel to the frame (2) using cable ties (3). Fasten the cable (4) to the right handle (R) us- ing cable ties (3). ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU...
- Page 7 Hook the front support (1) into the two longitudinal holes (2) on the frame and move it forward. Fix the front support (1) to the tray using a round-headed screw (3), a washer (4), a spring washer (5) and a nut (6). ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU...
-
Page 8: Operation
"I" = ON. 2. Press the red button (2). 3. Turn the lever (3) on the control element to set the electrical support; the further the control lever is pressed down, the more electrical support is provided. ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU... - Page 9 - All 3 LEDs light up: Battery charge level between 100-50% - Only red and orange LEDs light up: Battery charge level between 50-10% - Only the red LED lights up: Please charbe the battery ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU...
-
Page 10: Maintenance
Solution No electrical support Battery is not charged Recharge battery Motor stucks Check motor Power switch is damaged Check switch Broken or loose cables Check cables No charging of battery Loosen cable Check cable connection ZIPPER MASCHINEN GmbH www.zipper-maschinen.at ZI-EWB500-AKKU...
Need help?
Do you have a question about the ZI-EWB500 and is the answer not in the manual?
Questions and answers