Fagor FIC-381E Installation And User Manual page 43

- If necessary, assemble the plastic profile B in
B
the upper plate frame C.
C
- Position the appliance by lining up the upper
frame C (or the plastic profile B) with the inte-
gration unit angle; cut the profile D to the
height of the niche and assemble it with the
adhesive part stuck to the wall of the appli-
ance.
- Slide the appliance up against the wall so
that the profile D is compressed, and position
the upper and lower fixing screws.
- Assemble the guide supports E on the out-
Fig. 2a
side of the appliance door (using the existing
holes) and with the doors fully open, secure
the door guide F on the unit door.
- Adjust the join between the appliance door
and the unit door and cover the guide screws
with the corresponding adhesive coverings.
D
E
F
Fig. 2b
43