63633044GB.fm Page 60 Saturday, March 5, 2005 6:11 PM INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT PRECAUTIONS AND GENERAL RECOMMENDATIONS HOW TO OPERATE THE REFRIGERATOR COMPARTMENT HOW TO OPERATE THE FREEZER COMPARTMENT HOW TO DEFROST AND CLEAN THE...
3. Installation of the appliance and electrical connections must be carried out by a qualified electrician, in accordance with the manufacturer's instructions and local safety regulations 4. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. Packing Information:...
• Be careful not to damage the floors when you • Make sure that your appliance is not near a heat move the appliance (e.g. parquet flooring). source. • Do not use mechanical devices or any means •...
• The space between the shelves and the rear wall of the refrigerator compartment must be unobstructed to allow circulation of air. • Do not place food in direct contact with the rear wall of the refrigerator compartment. • Do not place hot food in the refrigerator or freezer.
• Always observe the storage information on the package. Making ice cubes • Fill the ice cube tray 3/4 with water and place it at the bottom of the freezer compartment. Do not use sharp or pointed instruments to detach the tray if it...
HOW TO DEFROST AND CLEAN THE FREEZER Defrost the freezer compartment once or twice a year, or when the ice on the walls reaches a thickness of about 3 mm. If possible, defrost the freezer when it is nearly empty.
63633044GB.fm Page 66 Saturday, March 5, 2005 6:11 PM CARE AND MAINTENANCE For built-in appliances • Periodically clean air vents with a vacuum cleaner or a brush (see figure A). • Clean the outside using a soft cloth. Freestanding appliances •...
• Fit the accessories supplied. reminders. • If the plug and socket are not of the same type, Electrical Connection have the socket replaced by a qualified • Electrical connections must be made in electrician.
Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1.