Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ecostrad Heatglo
Summary of Contents for Ecostrad Heatglo
- Page 1 Ecostrad Heatglo Infrared Heater PLEASE READ AND SAVE THESE INSTRUCTIONS...
- Page 2 Symbols Warning This symbol indicates a hazard with an average risk level which, if not avoided, could result in serious injury or death. Warning of electrical voltage This symbol indicates danger to the life and health of persons due to electrical voltage.
-
Page 3: Table Of Contents
Contents About the Manual - - - - - - - - - - - - - - - - - - - - 4 2 | Warnings & Precautions- - - - - - - - - - - - - - - - - 4 3 | Technical Information - - - - - - - - - - - - - - - - - - 7 4 | Installation - - - - - - - - - - - - - - - - - - - - - - - - - 7 4-1 Fixings- - - - - - - - - - - - - - - - - - - - - - - - - 7... -
Page 4: About The Manual
1 | About the Manual This manual describes the Ecostrad Heatglo Infrared Heater and details how to install and use the product. It is important to thoroughly review this manual before using the product. The Ecostrad Heatglo Infrared Heater contains a ‘Helen lamp’ reflector heating system that provides even heat distribution. - Page 5 Warning This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or by inexperienced persons unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children and vulnerable people should be supervised to ensure they do not play with the appliance.
- Page 6 • This heater is not intended for use in bathrooms, laundry rooms and similar indoor locations. Never install the heater in a location where it may fall into a bathtub or other water container. • No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling.
-
Page 7: Technical Information
3 | Technical Information Table 1 | Specifications Voltage 220-240V AC / 50Hz Wattage 2000W Dimensions (WxHxD) 470x150x85mm IP Rating IP55 Appliance class Class I Power cable length 1.9m Weight 2.1kg 4 | Installation 4-1 | Fixings Before beginning installation, check that all fixings are supplied. Table 2 | Fixings Key Fixing Details... - Page 8 The heater must be mounted on the mounting bracket provided. This bracket has been specifically designed to allow the product to be fitted horizontally to a wall or ceiling. Do not attempt to mount the heater in any other way with these fixings. This heater must be installed by a qualified person - e.g.
-
Page 9: Installation With Stand (Optional)
Figure 4 | Fastening together the brackets 4. Thread the brackets over the bolts and fix securely to the mounting surface (See Figure 5. Figure 5 | Attaching brackets to wall or ceiling 5. Fasten the heater securely to the brackets using the screws (C). 6. -
Page 10: Operation
5 | Operation 1. Plug the unit into a plug socket with power supply suitably rated for the appliance. 2. Use the power button on the right side of the heater to switch the device on and off. 6 | Maintenance Careful and regular maintenance of the heater according to the instructions below is required to maximise the longevity and efficiency of your appliance. -
Page 11: Troubleshooting
3. Check if there is power supplied to the socket. If not, restore. 9 | Warranty The Ecostrad Heatglo Infrared Heater is supported by a 2-year guarantee covering the heater body and all electronic components, including the bulb. Within the stated... -
Page 12: Disposal
The warranty covers only the model of heater shown on the purchase invoice. The warranty covers the repair or replacement of the defective product only and Ecostrad shall have no liability for installation costs or consequential losses however incurred.
Need help?
Do you have a question about the Heatglo and is the answer not in the manual?
Questions and answers