Altusen KN-2108 User Manual page 90

KN2108 / KN2116 User Manual
The meanings of the adjustment options are given in the table below:
Option
Screen Position
Auto-Sync
RGB
Gamma
Video Quality
Bandwidth Control
74
Adjust the horizontal and vertical position of the remote
computer window by clicking the Arrow buttons.
Click Auto-Sync to have the utility detect the vertical and
horizontal offset values of the remote screen and automatically
synchronize it with the local screen.
If the local and remote mouse pointers are out of sync, in most
cases performing this function will bring them back into sync.
Note: This function works best with a bright screen.
If you are not satisfied with the results, use the Screen position
arrows to position the remote display manually.
Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component
of the image is correspondingly increased.
This section allows you to adjust the video display's gamma
level. This function is discussed in detail in the next section,
Gamma Adjustment.
Drag the slider bar to adjust the overall Video Quality. Values
can be from 20 to 100. The larger the value, the clearer the
picture and the more video data goes through the network.
Depending on the network bandwidth, a high value may
adversely effect response time.
This setting adjusts the ratio between picture quality and
network speed. For slow data connections, drag the slider bar
to a lower setting to decrease the amount of video data
transferred. This ensures screen refresh at workable speeds.
Usage