Endress+Hauser Proline Promass F 200 FOUNDATION Fieldbus Operating Instructions Manual page 91

Proline Promass F 200 FOUNDATION Fieldbus
Parameter
Control Totalizer 1 to 3
Preset value 1 to 3
Reset all totalizers
Endress+Hauser
Options Description
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
Preset + totalize The totalizer is set to the defined start value in Preset value parameterand the
totaling process is restarted.
Function scope of "Reset all totalizers" parameter
Options Description
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.
Navigation
"Operation" menu → Operation
‣
Totalizer handling
Control Totalizer 1 to 3
Preset value 1 to 3
Reset all totalizers
Parameter overview with brief description
Description
Control totalizer value.
Specify start value for totalizer.
Reset all totalizers to 0 and start.
11.7 Showing data logging
In the device, the extended function of the HistoROM must be enabled (order option) so
that the "Data logging" submenu appears. This contains all the parameters for the
measured value history.
Function scope
• A total of 1000 measured values can be stored
• 4 logging channels
• Adjustable logging interval for data logging
• Display of the measured value trend for each logging channel in the form of a chart
Selection / User entry
• Totalize
• Reset + hold
• Preset + hold
• Reset + totalize
• Preset + totalize
Signed floating-point number
• Cancel
• Reset + totalize
Operation
Factory setting
Totalize
0 kg
Cancel
91