Parts Of The Cros Device - Phonak CROS I User Manual

Multi-function button with indicator light
The button has several functions. The
primary function is as an on/off switch.
Together with your hearing care
professional, you can decide if it also allows
for volume balance control, mute, program
change and other functionalities. This is
indicated in your individual instructions.
Phone calls: If paired with a Bluetooth® enabled phone, a short
press will accept and a long press will reject an incoming call.
On/Off: Firmly press the lower part of the button for
3 seconds until the indicator light blinks.
On: indicator light is solid green
Off: indicator light is solid red
Flight mode: The CROS device itself can simply be switched off,
as no signal is transmitted in flight mode.
Tap Control
If your CROS system is fit with a performance level I90 or I70
hearing aid, multiple functions can be accessed using Tap
Control. Please refer to chapter 9 of this user guide and to the
user guide of your hearing aid.
To use Tap Control, tap the top of your ear twice.
8

2. Parts of the CROS device

The following pictures show the CROS device model
described in this user guide.
You can identify your personal models by:
• checking "Your CROS system details" on page 3.
• comparing your earpieces, hearing aid with the models
on the following pages.
Phonak CROS I provides a CROS and BICROS solution for
people with an unaidable hearing loss in one ear. CROS I is
worn on the unaidable ear to pick up sounds and
wirelessly transmit them to a compatible Phonak hearing
aid worn on the ear with better hearing.
CROS I has no acoustical output.
Phonak CROS I device + Phonak hearing aid =
Phonak CROS system
CROS I is only compatible with Audéo I-R
hearing aids.
9