Configure To Support Iptv Service - TP-Link Archer BE400 User Manual

Chapter 16
2. Go to Advanced >
3. Flow Controller is enabled by default. Please note that enable
cause internet drop with some devices.
16 4

Configure to Support IPTV Service

I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced
1 If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the IGMP Proxy
either V2 or V3, as required by your ISP.
2 ) Check the Wireless Multicast Forwarding
packets will be forwarded automatically. You are recommended to keep it as
default.
3 ) Click SAVE.
Network > LAN, and locate the
> Network > IPTV/VLAN.
and IGMP Snooping
Customize Your Network Settings
Flow Controller
Flow Controller
checkbox, then select the
status. When enabled, the multicast
section.
may
IGMP Version,
110