Table of Contents
Advertisement
Chapter 1
(Internet)
(Ethernet)
(USB)
(WPS)
1 2 2
Back Panel
The following parts are located on the back panel.
Item
WPS
LED/ Wi-Fi
Reset
White On
Internet service is available.
The router's Internet port is connected, but the internet service
Red On
is not available.
Off
The router's Internet port is unplugged.
At least one powered-on device is connected to the router's LAN
On
port.
Off
No powered-on device is connected to the router's LAN port.
On
The USB device is identified and ready to use.
Off
No USB device is plugged in to the USB port.
This light remains on for 5 minutes when a WPS connection is
On/Off
established, then turns off.
Flashing
WPS connection is in progress. This may take up to 2 minutes.
Press for 1 second, and immediately press the WPS button on your client
device to start the WPS process.
Press for 1 second to turn on or off the LED of your router.
Press and hold for about 2 seconds to turn on or off the wireless function of
your router.
Press and hold this button for about 10 seconds until the Power LED blinks
to reset the router to its factory default settings.
Get to Know About Your Router
Description
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer BE400 and is the answer not in the manual?
Questions and answers