TP-Link Archer BE400 User Manual page 22

Chapter 4
• Set up an IPv6 Internet Connection
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > IPv6.
3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips:
If you do not know what your internet connection type is, contact your ISP or judge according to the already known
information provided by your ISP.
4. Fill in information as required by different connection types.
1 ) Static IP: Fill in blanks and click SAVE.
2 ) Dynamic IP(SLAAC/DHCPv6):
your ISP requires. Click
Click Advanced
SAVE and then click RENEW.
Set Up Internet Connection
to input further information if
19