Table of Contents
Advertisement
Chapter 15
3. In the
Client IP Address
leased to the devices by the L2TP/IPSec VPN server.
4. Keep
IPSec Encryption
Note: Enable NetBIOS Passthrough function to allow NetBIOS packets to be broadcasted through VPN tunnel.
5. Click SAVE.
6. Configure the L2TP/IPSec VPN connection account for the remote device. You can
create up to 16 accounts.
4 ) Click Add.
5 ) Enter the
Username
VPN Server.
6 ) Click ADD.
Step 2 Configure L2TP/IPSec VPN Connection on Your Remote Device
field, enter the range of IP addresses (up to 10) that can be
as
Encrypted
and create an
and
Password
to authenticate devices to the L2TP/IPSec
VPN Server&Client
IPSec Pre-Shared
Key.
90
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer BE400 and is the answer not in the manual?
Questions and answers