System Log - TP-Link Archer BE400 User Manual

Be6500 dual-band wi-fi 7 router
Table of Contents

Advertisement

Chapter 17
1. Tick the
Enable
checkbox of
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535.
3. Select
Specified Device
4. In the
Only this IP Address
the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to
IP:port number
(such as http://113.116.60.229:1024).
Tips: The router's WAN IP is usually a dynamic IP. Please refer to
to log in to the router through a domain name.
17 7

System Log

When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
To save the system log locally:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to
Advanced
>
3. Choose the type and level of the system logs as needed.
4. In the
Save Log
section, click
Remote
Management.
for
Remote
Management.
field, enter the IP address of the remote device to manage
System
>
System
Log.
SAVE TO LOCAL
http://Router's WAN
Set Up a Dynamic DNS Service Account
to save the system logs to a local disk.
Manage the Router
if you want
126

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Archer BE400 and is the answer not in the manual?

Table of Contents

Save PDF