Manually Set Up Your Internet Connection - TP-Link Archer BE400 User Manual

Chapter 4
2. Launch the Tether app and log in with your TP-Link ID.
Note: If you don't have a TP-Link ID, create one first.
+
3. Tap the button, and select
to complete the setup and connect to the internet.
Note: Due to Tether app updates, your actual user interface and pathway may differ from those described here.
4. Connect your devices to the newly configured wireless networks of the router and
enjoy the internet!
4 3

Manually Set Up Your Internet Connection

In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Internet.
3. Select your internet connection type from the drop-down list.
4. Follow the instructions on the page to continue the configuration. Parameters on
the figures are just used for demonstration.
1 ) If you choose
address. Dynamic IP users are usually equipped with a cable TV or fiber cable.
OR
Wireless Router > Standard
Dynamic IP, you need to select whether to clone the MAC
Set Up Internet Connection
Routers. Follow the steps
15