Set System Time - TP-Link Archer BE400 User Manual

Chapter 17
3 ) Modify the Ping Count
keep the default value.
4 ) If you have chosen Traceroute, you can modify the
recommended to keep the default value.
4. Click START to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Traceroute.
17 9

Set System Time

System time is the time displayed while the router is running. The system time you
configure here will be used for other time-based functions like Parental Controls. You
can choose the way to obtain the system time as needed.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
• To get time from the internet:
1. Enable 24-Hour Time
number and the
System > Time .
if you want the time to display in a 24-hour way.
Ping Packet Size. It's recommended to
Traceroute Max
Manage the Router
TTL. It's
129