Tools Required - IBM Programmed Symbols Adapter Operating Instructions Manual

Tools Required
You should have the following tools:
• A Medium- ize, flat-blade screwdriver
• A 3/16-inch nutdriver (optional)
• A 1/4-inch nutdriver (optional).
2 Option Instructions
In stallation Instructions
Key L ock
1
If the metal cover over the y tern unit has
already been removed , go to Step 10;
other~ise
follow the steps s tarting here.
Set the On/Off swi tch on your system unit
to Off.
2
Set the On/Off switches on all externally
attached devices (e.g., printer, display) to
Off.
3
Be sure that the Key Lock is unlocked
(turn the key counterclockwise and remove
the key).
U n l ocked Positi o n Lock ed Posi t ion
4
Unplug the system unit power cord from
the wall outlet.
July 1985 3