Related Manuals for Rice Lake Healthweigh H651-10
Summary of Contents for Rice Lake Healthweigh H651-10
- Page 1 Healthweigh H651-10 ® Class I MDR Baby Scale Model 2 and 4 Operation Manual August 20, 2024 PN 217791 Rev B...
- Page 2 All information contained within this publication is, to the best of our knowledge, complete and accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
- Page 3 August 20, 2024 Updated compliance and certification sections Table i. Revision Letter History Technical training seminars are available through Rice Lake Weighing Systems. Course descriptions and dates can be viewed at www.ricelake.com/training or obtained by calling 715-234-9171 and asking for the training department.
-
Page 4: Table Of Contents
6.0 Appendix ................15 Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost. -
Page 5: Introduction
Do not operate or work on this equipment unless this manual has been read and all instructions are understood. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement manuals. -
Page 6: Disposal
Healthweigh H651-10 CAUTION: To prevent injury, never leave the person being weighed unattended while on the scale. To prevent injury, do not transport the scale while a patient is on the scale. Make sure no load is on the scale before transporting the scale. -
Page 7: Setup
AC power source is absent or USB boost is absent. AC/DC adapter is used as a disconnection device from the mains. CAUTION: Use only medically approved power sources compliant with EN60601-1 standard. © Rice Lake Weighing Systems ● All Rights Reserved... -
Page 8: Scale Setup
Healthweigh H651-10 Scale Setup Follow the procedure below to set up the scale device: 1. To operate using the AC adapter, insert the AC adapter cable into the back of the scale and the AC adapter plug into a power source. -
Page 9: Operation
Accepts the value of the parameter last entered and moves to the next stage. A long press during scales start-up process will enter id display (pre-parameter mode). Table 3-1. Keypad Functions © Rice Lake Weighing Systems ● All Rights Reserved... -
Page 10: Display
Healthweigh H651-10 Name Function Shift Left This key is used to shift left the digit flashing. Up/Down This key used to adjust the value of the flashing digit/number. Table 3-1. Keypad Functions (Continued) Preset Tare 1. When the weight is below the limit, press the TARE key. -
Page 11: Weighing
NOTE: IF the scale has not been used for two minutes, it switches off in order to save battery life and power. To restart the scale, press the ON/OFF button. Communication For connecting the scales with the computer, please refer to Rice Lake Weighing Systems’ technical support or distributor. © Rice Lake Weighing Systems ● All Rights Reserved... -
Page 12: Maintenance
Healthweigh H651-10 4.0 Maintenance This section provides instructions for maintenance, cleaning, troubleshooting and operator replaceable parts for the ® Healthweigh Baby Scale Model H650/H651. Maintenance operations other than those described in this section should be performed by qualified service personnel. -
Page 13: Troubleshooting
Definition Check/Replace A/D saturation Check loadcell - Call technician Error in reading Real Time Clock Battery of real time is empty or faulty board - Call technician Table 4-2. Error List © Rice Lake Weighing Systems ● All Rights Reserved... -
Page 14: Specifications
The scale is not intended for use in the presence of flammable mixtures. In order to comply with EN60601-1 use rechargeable battery supplied by Rice Lake Weighing Systems. In order to comply with EN60601-1 USB Power supply will be from a medical grade approved source only. Client will take full responsibility upon use of USB power connection. -
Page 15: Appendix
Immunity test level (A/m) 30 kHz 134.2 kHz Pulse modulation, 2.1 kHz 13.56 MHz Pulse modulation, 50 kHz : rated voltage(s); E.g. 25/30 cycles means 25 cycles at 50Hz or 30 cycles at 60Hz © Rice Lake Weighing Systems ● All Rights Reserved... - Page 16 Healthweigh H651-10 Guidance and Manufacture's Declaration – Electromagnetic Emissions The medical scale is suitable for use in the specified electromagnetic environment and it has meets the following standard’s emission requirements. Phenomenon Profession Healthcare Facility Environment Home Healthcare Environment Conducted and radiated RF emissions...
- Page 18 © Rice Lake Weighing Systems Content subject to change without notice. 230 W. Coleman St. • Rice Lake, WI 54868 • USA USA: 800-472-6703 • International: +1-715-234-9171 August 20, 2024 PN 217791 Rev B www.ricelake.com...
Need help?
Do you have a question about the Healthweigh H651-10 and is the answer not in the manual?
Questions and answers