Page 1
350-10 Series Digital Wheelchair Scales Software Revision 11439 Operator Manual Model 350-10-3 Model 350-10-2 Model 350-10-7 Model 350-10-8 March 16, 2020 PN 151640 Rev D...
Page 2
All information contained within this publication is, to the best of our knowledge, complete and accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
Introduction Introduction The Rice Lake Digital Wheelchair Scale is a user-friendly, quality scale, designed for safe weighing of the handicapped and mobility challenged individuals. Movement compensation technology ensures sound, accurate weighments. The scale has roll on ramp access and comes in four different configurations: •...
Do not operate or work on this equipment unless this manual has been read and all instructions are understood. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement manuals.
• Box containing six AA batteries and four feet Repacking If the Rice Lake Digital Wheelchair Scale must be returned or moved, it must be properly packed with sufficient packing materials. When possible, use the original carton and packing material.
Page 8
350-10 Series Digital Wheelchair Scales 3. Screw the four feet clockwise into the scale base as far as possible. 4. Turn each foot counterclockwise two full rotations, to ensure there is adequate clearance between the scale and the floor. 5. Lower the scale base down to the floor carefully. There should be minimal clearance between the scale base and the floor.
When using battery or USB power supply, the back light power is deducted to 60%. AC Power Connections Use the optional 120 VAC or 230 VAC adapter when power is available. Rice Lake Weighing Systems offers optional AC adapters that plug into the back of the indicator as shown in Figure 2-5.
350-10 Series Digital Wheelchair Scales Operation The Rice Lake Digital Wheelchair Scale display has various front panel keys as shown in Figure 3-1. Figure 3-1. Front Panel Display Keys Key Descriptions Table 3-1 describes each of the key functions. Item No...
350-10 Series Digital Wheelchair Scales Body Mass Index (BMI) Function Use the following steps in determining the BMI. LB Mode 1. Ensure that the scale is at zero. 2. Have the person step on the scale to obtain a weight. LOCK displays. .
The scale comes with an RS-232 port that enables weight data to be transmitted to other equipment, such as a computer or printer. The RS-232 cable with DB-9 connector (PN 100719) is available from Rice Lake Weighing Systems. Figure 4-3 on page 12 shows where the RS-232 connection is.
350-10 Series Digital Wheelchair Scales Communication Protocols The Rice Lake Digital Wheelchair Scale has two communication protocols, escape and maintenance protocol. 4.2.1 Escape Protocol An escape protocol is where the escape (0X1B or ASCII 27) is used to indicate that there is a command following. On the PC side there must be a listener created by the vendor that will interpret this protocol.
350-10 Series Digital Wheelchair Scales USB Connection The Rice Lake Digital Wheelchair Scale has the capability of connecting to a PC using a USB connection and a USB cable (not included). USB Connection RS-232 Connection Figure 4-3. USB Connection Port Connecting software and downloads should be addressed by an IT professional, and can vary depending on the computer ®...
Page 18
350-10 Series Digital Wheelchair Scales 8. To verify the installation, the driver can be viewed in the device manager of the computer. Figure 4-8. Device Manager 9. To configure a printer using the USB driver, open the software driver Parpar in the device manager (Figure 4-8).
Maintenance and Troubleshooting Maintenance and Troubleshooting Maintenance The following section provides instructions for maintaining and cleaning the Rice Lake line of scales. Do not immerse the scale in cleaning or other liquid solutions. IMPORTANT Do not use Isopropyl alcohol or other solutions to clean the indicator display surface.
350-10 Series Digital Wheelchair Scales Limited Warranty Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by the Distributor/OEM and accepted by RLWS.