Gardner Denver Elmo Rietschle C-VLR 1000 Original Operating Instructions

Gardner Denver Elmo Rietschle C-VLR 1000 Original Operating Instructions

Vacuum pump

Advertisement

Quick Links

Edition: 1.0 · 1.2.2017 · BA 880-80-EN
Original Operating Instructions
C-VLR 1000
Vakuum pump
C-Serie
C-Series
Klaue
Claw

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elmo Rietschle C-VLR 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Gardner Denver Elmo Rietschle C-VLR 1000

  • Page 1 Edition: 1.0 · 1.2.2017 · BA 880-80-EN Original Operating Instructions C-VLR 1000 Vakuum pump C-Serie C-Series Klaue Claw...
  • Page 2: Table Of Contents

    Re-commissioning ............www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 3 Technical Data ............. . www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 4: Foreword

    Storage guidelines for machines I 150 Manufacturer’s declaration EU Directive 2002/95/EG (RoHS) — Abbreviations Fig. Figure C-VLR vacuum pump suction capacity mbar (abs.) Final vacuum, operating vacuum Directives, standards, laws See Conformity Declaration www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 5: Symbols And Meaning

    EN ISO 3744. Copyright Passing on or copying this document, using and providing information on its contents are prohibited unless expressly permitted. Contraventions will lead to claims for damages. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 6: Safety

    This applies for example to: • Symbols for connections • Data and motor data plate • Instruction and warning plates The operator is responsible for observing local regu- lations. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 7: Designated Use

    • using the machine in non-commercial plants if the necessary precautions and protective meas- ures have not been taken in the plant • installing in environments that are at risk of ex- plosions • using the machine in areas with ionising radia- tion • modifications to the machine and accessories www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 8: Personal Qualifications And Training

    • the standards and laws in force Safety notes for the operator • hot parts of the machine must not be accessible during operation or must be fitted with a guard • People must not be endangered by the free extraction or discharge of pumped media • Risks arising from electrical energy must be eliminated. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 9: Safety Instructions For Installing, Commissioning And Maintenance

    The manufacturer’s guarantee or warranty will no longer apply in the following cases: • Improper use • Not complying with these instructions • Operation by insufficiently qualified staff • Using spare parts that have not been approved by Gardner Denver Schopfheim GmbH • Unauthorised modifications to the machine or the accessories supplied by Gardner Denver Schopfheim GmbH www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 10: Transport, Storage And Disposal

    (Fig. 1/3) on the transport shackle (Fig. 1/2) firmly. b) The machine must be suspended on the eye- bolts and the transport shackle using the lifting device. Fig. 1 Lifting and transporting Eyebolts Transport shackle Fixing screw www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 11: Storage

    Parts subject to wear and tear (marked as such in the spare parts list) are special waste and must be disposed of in accordance with the national and local waste laws. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 12: Set Up And Operation

    Direction of rotation arrow Cooling air inlet Drive motor Cooling air outlet Motor data plate Oil filling point hot surfaces > 70 ° C Oil sight glass Mesh filter Oil discharge point www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 13: Data Plate

    If it is installed in the open air the unit must be pro- tected from environmental influences, (e.g. by a pro- tective roof). www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 14: Installation

    It is possible to install the machine on a firm base without anchoring. When installing on a sub- structure we recommend fixing with flexible buffers. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 15: Connecting Pipes

    No blocking systems must be built into the exhaust air pipe (max. pressure difference 30 mbars). When the exhaust air pipe is connected it must be checked regularly for impurities. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 16: Filling With Lubricating Oil

    NOTICE Power supply The conditions at the installation location must match the information on the motor data plate. Without derating the following is permissible: • ± 5 % Voltage deviation • ± 2 % Frequency deviation www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 17: Commissioning And Decommissioning

    When spending a long time in the vicinity of the running machine use ear protectors to avoid permanent damage to your hearing. NOTICE Wait until the machine stops The machine must only be switched on again after it stops. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 18: Checking The Rotation Direction

    Section 3.2.1, Page 11 Re-commissioning a) Check the condition of the machine (cleanliness, cabling etc.). For installation see Section 5 Page 16 For commissioning see Section 6.1 Page 19 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 19: Maintenance And Repair

    Check the oil level 7.2.1 8.000 h Changing the oil depending on how dirty the Clean the mesh filter 7.2.2 discharged medium is. Maintenance free Coupling 7.2.3 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 20: Changing The Oil

    Designation as per DIN 51502: CLP HC 150. We recommend the following oil brand: GEAR- LUBE 150 or equivalent oils by other manufacturers (also see oil recommendation plate (Fig. 4/M)). www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 21: Air Filtering

    Therefore, when cleaning with compressed air always wear goggles and a dust mask. 7.2.3 Coupling The coupling needs no maintenance. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 22: Repair/ Service

    The declaration of harmlessness is part of the supplier‘s documentation. b) After a repair or re-commissioning, the actions listed under „Installation“ and „Commissioning“ must be carried out as for initial commissioning. Fig. 6 Clearance certificate 7025.003.17 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 23: Spare Parts

    The use of other parts may lead Fig. 7 Spare parts list (example) to malfunctions and invalidate liability or the gua- rantee for any consequences arising. Fig. 8 Web site http://www.service-er.de www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 24: Malfunctions: Causes And Elimination

    Deposits on the rotary piston Clean the working space and Elmo Rietschle an abnormal noise the rotary piston Service Please contact Elmo Rietschle Service for other malfunctions or those that cannot be eliminated. www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 25: Technical Data

    • Download the PDF file: D 880/80 ➝  C-VLR 1000 • Download the pdf file http://www.gd-elmorietschle.com ➝  Downloads ➝  Product Documents ➝  C-Series  ➝  Data Sheets NOTICE Subject to technical changes. Fig. 9 Data sheet (example) www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH...
  • Page 26 Gardner Denver Schopfheim GmbH Johann-Sutter-Straße 6+8 79650 Schopfheim · Germany Phone +49 7622 392-0 +49 7622 392-300 Elmo Rietschle is a brand of Gardner Denver‘s Industrial Products Division and part of Blower Operations.

Table of Contents