Table of Contents
Advertisement
Notes: Video output capabilities are dependent on the video
card and hardware specifications of your connected Host
Computer.
Driver installation
When the docking station is powered and you connect it to
your laptop, the required drivers are installed automatically.
You may see a pop-up message requesting permission to allow
the docking station to connect to your computer. If a pop-up
message appears, do the following:
Click on the pop-up message.
1.
Click on Always Connect.
2.
Click on the OK button.
3.
Follow any other on-screen instructions to complete the
4.
installation.
Display Configuration
Use your operating system video settings to adjust display
settings for each of your monitors.
Note: The Host Computer must support dual external dis-
plays through its Thunderbolt 3 port.
Connecting an Active Adapter
You can also connect a display adapter to the Docking Station's
DisplayPort Port to connect a different type of Monitor.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
8
Advertisement
Table of Contents
Need help?
Do you have a question about the TB3DK2DHV and is the answer not in the manual?