Safety Instructions; Standards And Regulations - VWR Basic Vortex Mixer Instruction Manual

s i
afety nstructions
Please read the entire instruction manual before operating the Vortex Mixer.
WARNING! DO NOT use the Vortex Mixer in a hazardous atmosphere or
with hazardous materials for which the unit was not designed. Also, the
user should be aware that the protection provided by the equipment may
be impaired if used with accessories not provided or recommended by the
manufacturer, or used in a manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and maximum
safety.
DO NOT lift the Vortex Mixer by the head. All heads, including cup head, are
removable. They can pop off if lifted by them.
CAUTION! To avoid electrical shock, completely cut off power to the unit by
disconnecting the power cord from the wall outlet. Disconnect unit from the
power supply prior to maintenance and servicing.
Spills should be removed promptly. DO NOT immerse the unit for cleaning.
DO NOT operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
s & r
tanDarDs egulations
Troemner, LLC hereby declares under it's sole responsibility that the construction of
this product conforms in accordance with the following standards:
Associated EU guidelines:
EMC directive 2014/30/EU
LVD directive 2014/35/EU
RoHS directive 2015/863/EU
Safety standards:
CAN/CSA C22.2 No. 61010-1:2004
UL 61010-1:2004
EN 61010-1:2001
CAN/CSA-C22.2 No. 61010-2-051:2004
EN 61010-2-051:2003
EMC standards:
IEC/EN 61326-1: Electrical equipment for measurement, control and laboratory use -
EMC requirements -- Part 1: General requirements
IEC 61000-4-2 IEC 61000-4-3
IEC 61000-4-4 IEC 61000-4-5
IEC 61000-4-6 IEC 61000-4-8
IEC 61000-4-11 IEC 61000-3-2
IEC 61000-3-3 CISPR 11