VWR Basic Vortex Mixer Instruction Manual page 17

a '
ccessories cont D
Tube Holder Kit
Includes: (1) 9-13mm Tube Holder, (1) 14-19mm Tube
Holder, (1) 20-25mm Tube Holder, 1 Flat Foam Insert, 2
Vessel Harness, and 1 Insert Retainer
Part Number
3" Rubber Head Cover & 3" Head- Designed for mixing
irregular shaped objects.
Description
3" Rubber Head Cover
3" Head
3" Head with Rubber Cover
Cup Head - Designed for mixing one tube at a time.
Part Number
Single Tube Holder - Single tube, hands free mixing.
Easily attaches to the top of any Vortex Mixer with the
use of a strong magnetic base. Accepts tubes from 2.5
to 4.5" (6.4 to 11.4cm) in length. Minimum tube diameter
of 0.75" (1.9cm).
Part Number
58816-130
Part Number
58816-154
58816-152
12620-872
58816-156
12620-898
201 Wolf Drive • Thorofare, NJ 08086-0087
Phone: 856-686-1600 • Fax: 856-686-1601 • E-mail: troemner@troemner.com
0.5mL Micro-Tube Holder
Mixes (24) 0.5mL micro-tubes. For use with Single Tube Holder.
Part Number
1.5 to 2mL Micro-Tube Holder
Mixes (18) 1.5 to 2mL micro-tubes. For use with Single Tube Holder.
Part Number
Adapter for Vortex-Genie® Mixer*
Adapter plate easily adheres to the Vortex-Genie® Mixer housing so Single Tube
Holder (sold separately) can be attached.
Part Number
*The Vortex-Genie® Mixer is a registered trademark of Scientific Industries, Inc.
M :
anufactured by
TROEMNER, LLC
www.troemner.com
80859665 745160 (REV D - 3/22)
12620-894
12620-896
12621-252