Advertisement
Advertisement
Table of Contents
Related Manuals for Taga Harmony TTP-300
Summary of Contents for Taga Harmony TTP-300
- Page 1 TTP-300 MM/MC PHONO AMPLIFIER Instruction Manual Edition 10-17...
-
Page 2: Table Of Contents
Introduction TTP-300 is a miniature phono amplifier, which accepts turn cables equipped with MM and MC cartridges so you can enjoy music from your favorite vinyl records. The analogue output allows easy connection to a line input of your amplifier. -
Page 3: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 4: Important Safety Instructions
Important Safety Instructions 1. Read Instructions – All the safety and operating instruc- 13. Overloading - Do not overload wall outlets, extensions tions should be read before the product is operated. cords, or integral convenience receptacles as this cas 2. Retain Instructions – The safety and operating instruc- result in a risk of fire or electric shock. -
Page 5: Front And Rear Panel
Front and Rear Panel Front Panel: 1. MM / MC Phono selector 2. MM Phono LED indicator 3. MC Phono LED indicator Rear panel: 4. Analog Stereo RCA Line output 5. Analog Stereo RCA Phono input 6. Phono Ground Screw 7. -
Page 6: Hooking Up The Amplifier
Hooking Up the Amplifier 1. Make sure the phono amplifier is turned off (the Power Switch is in the „O - OFF” position and the DC Adapter Cable is removed). 2. Make sure that your main audio amplifier or receiver, to which want to connect this phono amplifier, is turned off. -
Page 7: Operation
Operation 1. Plug the DC Adapter Power Cable to the phono amplifier and connect the adapter with the electrical outlet. 2. Turn on the phono amplifier – press the Power Switch (the Power Switch should be in the position “I - ON”). 3. - Page 8 We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Phono Amplifier DC Adapter Power Cable Instruction Manual Your product is marked with the symbol as showed on the left.
Need help?
Do you have a question about the TTP-300 and is the answer not in the manual?
Questions and answers