Related Manuals for Taga Harmony TA-250MIC v.2
Summary of Contents for Taga Harmony TA-250MIC v.2
- Page 1 TA-250MIC v.2 CUSTOM INSTALL A/B SPEAKER STEREO AMPLIFIER Instruction manual Edition 10-2020...
- Page 2 It delivers pure and distortion-limited power as well as rich sound performance with stunning accuracy, soundstage and sensational dynamics. A variety of features and wired connections makes the TA-250MIC v.2 a very versatile device with ability to work in different applications: •...
-
Page 3: Table Of Contents
Contents Safety Instructions Front and Rear Panel Hooking Up Speaker Cables Hooking Up the Amplifier Operation Additional Information Specifications... -
Page 4: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 5 Safety Instructions 1. Read Instructions - All the safety and operating instructions 13. Overloading - Do not overload wall outlets, extension cords or should be read before the product is operated. integral convenience receptacles as this can result in a risk of fire 2.
-
Page 6: Front And Rear Panel
Front and Rear Panel Front Panel Power Switch (ON and OFF) and Power Status Indicator (around the Power Switch) Speaker Selector (A, B, A+B) Treble Regulator Bass Regulator Balance Regulator Volume Regulator Input Selector (CD, AUX1, AUX2, MP3) Microphone Level Regulator Microphone Echo Regulator 10. -
Page 7: Hooking Up Speaker Cables
Hooking Up Speaker Cables The Speaker Connectors can accommodate up to 10AWG speaker cables as well as most of popular plugs (banana etc.). It is recommended to leave about 150 cm (5 feet) of extra cable at the amplifier end to facilitate positioning and installation of the amplifier. -
Page 8: Hooking Up The Amplifier
Hooking Up the Amplifier CD Player, Radio tuner, Music Player, Satelite tuner, etc. Video console, etc. TV set, etc. Power cable Microphone Smartphone, tablet, laptop, etc. - Page 9 Hooking Up the Amplifier 1. Make sure the amplifier is turned off (the Power Switch and the Power Cable is removed from the wall outlet). 2. Turn the Volume Regulator to MIN (max counter clockwise). 3. Using speaker cables (not supplied with this product) connect your speakers to the SPEAKERS OUT (A or B, A and B) connectors located on the rear panel.
-
Page 10: Operation
Operation 1. Plug the Power Cable into the electrical outlet. 2. Turn on the amplifier – press the Power Switch (the Power Switch The Power Status Indicator around the Power Switch should turn on in a few seconds. If it does not, it means that the amplifier is working under an abnormal condition (a protection mode) –... - Page 11 Operation BALANCE regulator: You can adjust the balance of the volume output from the left and right speakers. Turn the knob towards the speaker (channel) which you want the volume output to be higher than in the other speaker (channel). The default: the knob is in the center position: the marker on the knob in the verticalpo- sition.
-
Page 12: Additional Information
Additional Information Break-In Your TAGA Harmony amplifier sounds great immediately after it is taken out of the carton but as in all amplifiers, the internal components of this amplifier require a “break-in” period to reach its full sonic capabilities. During the “break-in” period it is recommended to operate the amplifier at moderate volume levels. -
Page 13: Specifications
Specifications Type Custom Install stereo amplifier Class A/B Power Output 2 x 50W RMS 4Ω 2 x 40W RMS 8Ω ≤ 2% (30 - 20kHz) Signal/Noise ratio =>80dB (A-weighted): line inputs =>70dB (A-weighted): mic inputs Frequency Response 30Hz – 20kHz (+/-3dB) Inputs RCA stereo CD / AUX1 / AUX2, 3.5mm stereo MP3, 1/4”... - Page 14 We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Amplifier Instruction Manual Your product is marked with the symbol as showed on the left.
- Page 15 Notes...
- Page 16 Notes...