Related Manuals for Taga Harmony TA-600MULTI
Summary of Contents for Taga Harmony TA-600MULTI
- Page 1 TA-600MULTI CUSTOM INSTALL 4-ZONE STEREO AMPLIFIER Instruction manual Edition 12-2018...
- Page 2 A variety of features and wired connections makes the TA-600MULTI a very versatile device with ability to work in different application: • Multi-room sound. 4-zone, high-power stereo amplifier able to drive four pairs of speakers (from 4 to 16ohms) –...
-
Page 3: Table Of Contents
Contents Safety Instructions Important Safety Instruction Front and Rear Panel Hooking up speaker cable Hooking up the amplifier Operation Specifications... -
Page 4: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 5: Important Safety Instruction
Important Safety Instructions... -
Page 6: Front And Rear Panel
Front and Rear Panel Front Panel Power Switch (ON and OFF) and Power Status Indicator (around the Power Switch) INDIVIDUAL FOR ZONE 1 / ZONE 2 / ZONE 3 / ZONE 4 Treble Regulator Bass Regulator Microphone Switch (ON and OFF) Microphone Status LED Indicator Volume Regulator Input Selector (OFF, USB, AUX, MP3) -
Page 7: Hooking Up Speaker Cable
Hooking up Speaker Cables The Speaker Connectors can accommodate up to 10AWG speaker cables as well as most of popular plugs (banana etc.). A 10AWG cable is recommended for longer connections (longer than 20 meters / 66 feet). For shorter lengths you can use 12/14 or 18 AWG cables. - Page 8 Hooking up the Amplifier Microphone USB stick Smartphone, tablet, laptop, etc. 1. Make sure the amplifier is turned off (the Power Switch and the Power Cable is removed). 2. Turn the Volume Regulator of each ZONE to MIN (max counter clockwise). 3.
-
Page 9: Operation
Operation 1. Plug the Power Cable to the amplifier and into the electrical outlet. 2. Turn on the amplifier – press the Power Switch (the Power Switch should be in the down position The status LED around the Power Switch should turn orange in a few seconds. If it does not, it means that the amplifier is working under an abnormal condition (a protection mode) –... - Page 10 Operation Operations available individually for each ZONE: Volume Regulator: For each ZONE you can adjust the sound volume from minimum (the knob – max counterclockwise) to maximum (the knob – max clockwise). Distortion and sound quality worsening may occur when the knob is in the maximum position. It may damage the amplifier or speakers.
-
Page 11: Specifications
Operation Operations available only simultaneously for all ZONES (changes will affect all ZONES): Microphone Level Regulator (MIC VOL): You can adjust the sound level of the microphone relative to the currently played background music. To make the microphone sound more audible turn the MIC VOL knob clockwise (+) and to make it less audible rotate the knob counterclockwise (-).The master volume level for both the microphone and background music is regulated by the Volume Regulator of each ZONE. - Page 12 We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Amplifier Power Cable Instruction Manual Your product is marked with the symbol as showed on the left.