2 x 100W, 8 ohm, Class A/B Vacuum Tubes 12AX7 x 2pcs; 12AU7 x 2pcs Less or equal 0.1% (1kHz 1W) Signal/Noise ratio 90dB HTA-2000B 20Hz – 20kHz (+/- 0.5dB) Inputs RCA stereo analog: CD, Line, AUX Frequency Response Digital: Optical, Coaxial Connectivity Wireless Bluetooth®...
Page 2
Vacuum Tube Amplifier Instructions The TAGA Harmony HTA-2000B is a full sized high-end hybrid tube / transistor integrated amplifier with a built-in Digital-to-Analog Converter (Coaxial and Optical inputs) and Bluetooth® wireless connectivity. It enables connecting a variety of digital Bluetooth®...
Page 4
System set-up Vacuum Tube Amplifier Instructions Front panel Left speaker Right speaker 1. INPUT Selector By rotating this knob you can choose the desired audio source. Make sure the audio source is properly connected to the rear panel inputs. The selected source is indicated by one of Led indicators on the front panel.
Page 5
• Select Bluetooth® on your audio source (smartphone, laptop etc.) and start scanning for available Bluetooth® devices. • After a short time “HTA-2000B” will appear on the screen of your audio source. Select “Pair” on your audio source to connect with the amplifier.
Remote Control Instructions Remote Control Instructions Battery Installation Remote Control – Functions 1. Open the cover of the battery compartment. • MUTE - During playback press this button to 2. Insert two AAA batteries into the battery compartment. Carefully stop amplifier audio output (no sound will be audible), follow the polarity diagram inside the battery compartment ( positive + and negative - symbols ).