Related Manuals for Taga Harmony TCA Series
Summary of Contents for Taga Harmony TCA Series
- Page 1 TCA Series 100V MULTIZONE MONO MIXING AMPLIFIERS Instruction Manual Edition 08-2019...
-
Page 2: Specifications
Introduction Thank you for purchasing TAGA Harmony amplifier. The TCA series amplifiers are perfect solution for commercial installations in restaurants, pubs, shops, conferencing rooms, fitness clubs for both background music playback and paging (voice announcement) systems. This amplifier allows to build a cost-effective multi-zone installation and mix music from analog inputs with voice announcements. -
Page 3: Table Of Contents
Contents Safety Instructions Important Safety Instructions Front and Rear Panel Rack installation Speaker Connection Hooking up the Amplifier Operation Kit Content... -
Page 4: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 5: Important Safety Instructions
Important Safety Instructions... -
Page 6: Front And Rear Panel
Front and Rear Panel TCA-240V model shown - available controls and inputs as well as their placement may vary depending on the model. Front panel 1. POWER Switch (1 – ON, 0 – OFF) 2. Status LED Indicators: ON – Power Status SIG –... -
Page 7: Rack Installation
Front and Rear Panel Rear panel 13. Ventilation fan 14. MIC1 - Microphone number 1 Jack Input [6.3mm (¼”)] 15. LINE1 / LINE2 / LINE3 – Analog RCA Inputs (both L/R channels are mixed together) 16. MONO OUT – Analog RCA Output in Mono 17. -
Page 8: Speaker Connection
Speaker Connection The Speaker Connectors can accommodate up to 10AWG speaker cables. A 10AWG cable is recommended for longer connections (longer than 20 meters / 66 feet). For shorter lengths you can use 12/14 or 18 AWG cables. It is recommended to leave about 150 cm (5 feet) of extra cable at the amplifier end to facilitate positioning and installation of the amplifier. - Page 9 Speaker Connection 100V OR 70V AMPLIFIER BLACK - (COM) OTHER COLOR + (100V or 70V) SPEAKER WIRES SPEAKER (100V or 70V) Low-impedance mode – connection WARNING! Make sure that your speaker is suitable to work and is compatible with the amplifier working impedance - otherwise you may damage the amplifier and/or the speakers and void your warranty.
- Page 10 Speaker Connection Connection options This amplifier offers two connection options for the speaker : Additional Speaker Output and Zone Outputs. WARNING! • Never connect both connection options simultaneously - it may damage the amplifier and/or the speakers and void your warranty. •...
-
Page 11: Hooking Up The Amplifier
Speaker Connection /TCA-240V model and 6-zone 100V connection shown/ ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 Hooking up the Amplifier TCA-240V model shown - available controls and inputs as well as their placement may vary depending on the model. Microphone... - Page 12 Hooking up the Amplifier Interconnect RCA TAPE / CD Recorder, etc. Interconnect RCA FM/AM tuner, etc. CD Player, etc. Microphone 1. Make sure the amplifier is turned off (the Power Switch in 0 and the Power Cable is removed from the power outlet). 2.
-
Page 13: Operation
Operation 1. Plug the Power Cable into the electrical outlet. 2. Switch on the amplifier – press the Power Switch (the Power Switch should be in the 1 position). The ON Power Status LED should turn on in a few seconds. If it does not, it means that the amplifier is working under an abnormal condition (a protection mode) –... - Page 14 Operation BASS Regulator: You can adjust bass output of the amplifier. The default: the knob is in the center position : the marker on the knob in the vertical position (0). Turn the knob counterclockwise (-) to decrease the amount of low frequencies.
- Page 15 Operation MONO OUT This output can be used to record audio from the amplifier on an external device or to connect other external devices. The output audio signal level is fixed (is not regulated by the Volume Regulator). The treble / bass regulation will affect this output. Note! This amplifier is a mono device - Left and Right output contain the same audio signal.
-
Page 16: Kit Content
We strongly advise that your sound system is designed and installed by a licen- sed professional engineer or designer (installer). We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Amplifier Instruction Manual Your product is marked with the symbol as showed on the left.