Related Manuals for Taga Harmony HTA-25B
Summary of Contents for Taga Harmony HTA-25B
- Page 1 HTA-25B HYBRID INTEGRATED AMPLIFIER M E T E R Instruction Manual Edition 05-2019...
-
Page 2: Specifications
The removable IEC power cable gives an option to upgrade your system with a premium audiophile power cable in any time. The HTA-25B combines the analog sound of tubes with the power of transistors to give the best sound at the price! Cleaning Do not use strong or abrasive cleaners. -
Page 3: Table Of Contents
Contents Safety Instructions Important Safety Instructions Front and Rear Panel Hooking up speaker cables Hooking up the amplifier Operation Additional Information Specifications... -
Page 4: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 5: Important Safety Instructions
Important Safety Instructions... -
Page 6: Front And Rear Panel
Front and Rear Panel Front Panel: Power Switch (ON and OFF) and Power Status Indicator (around the Power Switch) USB Stick Input Headphone ¼” Jack Output USB and Bluetooth Knob (Play/Pause, Next/Previous) Input Selector (USB, CD, Bluetooth, AUX) USB/Bluetooth Input Status Led Indicator VU Meter Treble Regulator Bass Regular... -
Page 7: Hooking Up Speaker Cables
Hooking Up Speaker Cables The Speaker Connectors can accommodate up to 10AWG speaker cables as well as most of popular plugs (banana etc.). A 10AWG cable is recommended for longer connections (longer than 20 meters / 66 feet). For shorter lengths you can use 12/14 or 18 AWG cables. - Page 8 Hooking up the Amplifier Right speaker Left speaker TAPE, CD Player, etc. FM/AM tuner, etc. CD Recorder, etc. Interconnect RCA Speaker cables Make sure the amplifier is turned off (the Power Switch is in the top position and the Power Cable is removed). Turn the Volume Regulator to MIN (max counter clockwise).
-
Page 9: Operation
Operation Plug the Power Cable to the amplifier and into the electrical outlet. Turn on the amplifier – press the Power Switch (the Power Switch should be in the down position The status LED around the Power Switch should turn orange in a few seconds. If it does not, it means that the amplifier is working under an abnormal condition (a protection mode) –... - Page 10 Select Bluetooth® on your audio source (smartphone, laptop etc.) and start scanning for available Bluetooth® devices. After a short time “HTA-25B” will appear on the screen of your audio source. Select “Pair” on your audio source to connect with the amplifier. After connection...
-
Page 11: Additional Information
Volume / Bass and Treble regulations). Additional Information Break-In Your TAGA Harmony amplifier sounds great immediately after it is taken out of the carton but as all hybrid amplifiers, this amplifier requires a “break-in” period to reach its full sonic capabilities. - Page 12 Additional Information Turn off procedure Make sure to turn off the amplifier first when powering down your system. Note! If the amplifier was turned off even for a short period of time, you should wait at least 2 minutes before turning it back on. Do not turn it ON then OFF and then ON again in quick succession.
-
Page 13: Specifications
Specifications Power Output: 2 x 18W RMS / 8ohm 2 x 25W RMS / 4ohm Class A/B Vacuum Tubes: 2 x 6P1, 2 x 6N1 THD: Less or equal 0.5% (1kHz 1W) Signal/Noise ratio: ≥80dB Frequency Response: 20Hz – 20kHz Inputs: Analog: RCA stereo CD, AUX Digital: USB (MP3 / WMA / WAV / APE audio files) - Page 14 Notes...
- Page 15 Notes...
- Page 16 We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Amplifier Power Cable Cotton Gloves 1PAIR Instruction Manual Your product is marked with the symbol as showed on the left.