Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support MILK TEA SHAKER MACHINE MODEL:LJY120-1,LJY120-2, LJY120-2-1L We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 3
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. CORRECT DISPOSAL This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.
Page 5
3.When the machine is running, do not close, to avoid danger. 4.If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 5.Never dip machine into any liquid and sharp edges. Do not use the appliance with wet hands.
Parts description The parts' names for single and double cups are the same; the images are for reference only; please subject to the actual product. Operating Instructions Adjustment and placed the cup A:Adjust the shrapnel to a appropriate location by using M6 L-type hex wrench (The cup put on the cup holder, then push the cup (with the cap) forward , if the shrapnel can press the cup tightly, then the shrapnel is at - 4 -...
Page 7
the appropriate location) A:When place the cup, place the cup bottom aligned the cupholder B:Push the cup (with the cap) forward - 5 -...
Start and stop 1. After turning on the power supply, the power light is on, and the time indicator shows the stop time. (Factory default 15 seconds) 2. Put the cup (with liquid and cover the lid) on the cup holder, push the cup toward the machine.
Page 9
Fault Analysis and Treatment Cause of Check the Cases Approach Remark issue contents Power Check the Replacing the Afiter pressed problems power power outlet the start Plug and button.the Replace the socket Check the plug is machine did plug wire or Connection loose or not not work...
Need help?
Do you have a question about the LJY120-1 and is the answer not in the manual?
Questions and answers