Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support FACIAL STEAMER MODEL: DT-318 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Warning-To reduce the risk of injury, user must read instructions manual carefully. Correct Disposal This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 4
Please read ALL the instructions before using your machine. 1. Make sure the voltage in your outlet is the same as the voltage indicated on the appliance's rating label. Do not let children, minors, and pets get close to or touch the machine. 3.
20. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations. 21. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
· Connect the product to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for assistance. PRODUCT PARAMETERS Model: Voltage Input Power Plug Type 120~ 60Hz 750W America PLUG DT-318 220-240V~ 50Hz 750W European PLUG...
Attention: 1. The voltage used for this device must be the same as the power supply voltage. 2. Users need to install it near the power switch and fuse. ASSEMBLE STEPS 1. Before using the appliance for the first time, peel off any promotional and packaging materials and check that the product is clean and dust-free.
Page 8
STEP3: Place the plastic item on the metal feet. STEP4: Insert the lifting rod into the center hole. STEP5: Tighten the rod to the base of the lifting pole with a wrench when inserting it through the concave and convex iron plate center hole.
STEP7: Take out the main steaming machine and fix it on the top of the stand by pointing the hole on the bottom of the main machine. PROCEDURE FOR OPERATION 1. Place the device onto the support stably. 2. Check if the seal for the hot water cup has been tightened up. 3.
CLEANING AND STORAGE 1. Once you have finished using, remove the plug from the electrical outlet. Allow the product to cool down completely before cleaning. 2. Please use white vinegar or 5% citric acid to clean, do not use other cleaning fluids, otherwise it will damage the machine.
Page 11
THE WATER, which will bring electrolyte into the cup to make the unit detect there is water inside. The steamer will now start working. Do not use this product near the bathtub,shower room,basin or other water container. ANTI-WATER-SPRAY MECHANISM The device will not spray but give an alarm in case there is water,which indicates the anti-water-spray mechan ism is working.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the DT-318 and is the answer not in the manual?
Questions and answers