Installing The Pc (Ethernet Client) Driver - D-Link DSL-302G User Manual

Installing the PC (Ethernet Client) Driver

To install the PC (Ethernet Client) driver for a PC-attached configuration on a PC running Windows 98
SE/Windows 2000, follow the procedure below:
Note: If you have just installed the PC (USB) driver for a PC-attached Modem configuration, this
procedure will automatically follow on from either of these procedures. The PC having initially
detected the DSL-302G as a PC-attached USB device will now detect the DSL-302G as an
Ethernet device.
Therefore, the Ethernet driver (VVB Client) now needs to be installed. If this procedure does not
automatically follow, you need to reset your DSL-302G.
The Add New Hardware Wizard dialog box is displayed showing that it needs to install a driver for the
1.
VVB Ethernet port:
Click on Next to continue. The following dialog box is displayed asking you to specify how to install the
2.
driver:
Ensure that the first option is selected and click on Next. The following dialog box is displayed asking you
3.
to specify where the driver can be found: