Installing The Usb Driver For Windows Vista / Xp / 2003 - D-Link DCM-604 Series User Manual

DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor
User's Manual
4. Installing the USB Driver for Windows Vista / XP /
2003
If you connect the Cable Modem to PC via USB port, then your will need to install the USB
driver. Please follow the description below to install the driver for your PC. If you are
connecting the Cable Modem to your PC only using the Ethernet port, please skip this
section.
1.
Connect USB cable from PC to cable modem.
2.
Connect RF cable and power on cable modem. Wait until it registers. It will take about
40 seconds to 4 minutes, depending on network traffic. Cable modem may reboot if
you previously connect it through Ethernet port.
3.
Windows will prompt new hardware found. Insert the Driver CD into your CD-ROM
drive.
4.
You may see the below window if you have inserted your Driver CD into your CD-
ROM drive.
5.
Select "Install the software automatically (Recommended)" and then click Next.
6.
Windows will locate the driver automatically. Please click Continue Anyway to
continue the installation process.
9