Advertisement
SOFTWARE INSTALLATION FOR WINDOWS 95/98/2000
Installing the Device Driver
1.
Insert the device driver compact disc or disks by sequence into your
computer.
2.
Double-click My Computer.
3.
Double-click the drive whichever contains the device driver. For example,
if you are using disks, insert the disks into drive A, double-click "3½
Floppy (A:)". Or if you are using compact disc, select the CD-ROM drive
and double-click folder Win9x when in Windows 95/98, or Win2000 for
Windows 2000.
4.
Double-click Setup.exe. The installation program will proceed
automatically. Follow the on-screen instruction. While for installation
under Windows 2000, remember to close the following window to
continue.
5.
When finished, click the Finish button, and you will be asked to restart
your computer. Before your computer is reset, insert the PCMCIA card
into your PCMCIA socket. (Refer to hardware installation.)
6.
When Windows restart, Windows will automatically detect the new
device.
7.
For Windows 2000, the following picture will also appear afterwards.
Click Yes to continue.
- 7 -
Advertisement
