Subscribe to Our Youtube Channel
Related Manuals for WamBam JIMINY PICKET VG24300
Summary of Contents for WamBam JIMINY PICKET VG24300
- Page 1 VG24300 ASSEMBLY INSTRUCTIONS JIMINY PICKET ASSEMBLY INSTRUCTIONS VINYL GATE VG24300 60 MIN Want to see a video on how to assemble this product? Scan the QR code WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM VER. 042921...
- Page 2 VG24300 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. unobstructed assembling. components. MISSING VISIT OUR WEBSITE FIRST, PARTS? DAMAGED SO WE CAN HELP YOU RIGHT AWAY! Although great care has been taken to ensure proper packaging care department.
- Page 3 VG24300 ASSEMBLY INSTRUCTIONS INFORMATION GENERAL understand your fence. 1. That you have everything necessary to complete the gate. 2. That you will have assembled the gate frame in the correct order. 4. The gate height and width are similar to the measurements shown on page four. install your gate posts before you do anything else.
- Page 4 DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS 48 in. 48 in. 50.5 in. 24 in 2 in. Ground 3 in. Ground 3 in 50 in. WamBam Anchor (Small) 36 in. 54.5 in. Center to Center 1.5in. 1.5in. 3.5in. 3.5in. 1.5in. 3.5in. Top Rail...
- Page 5 VG24300 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 1: Gate Jig (1) Vinyl Glue (1) Hinge (2) Tension Pin (1) WWW.WAMBAMFENCE.COM...
- Page 6 VG24300 ASSEMBLY INSTRUCTIONS STEP 2: STEP 2.1 STEP 2.2 Stabilizer and pound it into the ground. into the metal post stabilizer and determine The metal post 5½” stabilizer is to be used only on the hinge post. STEP 2.3 STEP 2.4 Place the Gate Jig metal post stabilizer.
- Page 7 VG24300 ASSEMBLY INSTRUCTIONS STEP 2.7 Make sure to fasten the fence panels STEP 3: STEP 3.1 is ribbed internally. STEP 3.2 STEP 3.3 into the opposite corner bracket. WWW.WAMBAMFENCE.COM...
- Page 8 VG24300 ASSEMBLY INSTRUCTIONS STEP 4: STEP 4.1 Insert the Top Rail STEP 5: STEP 5.1 Slide the gate frame top Fully assembled gate frame. WWW.WAMBAMFENCE.COM...
- Page 9 VG24300 ASSEMBLY INSTRUCTIONS STEP 5.2 The gate hinges will be installed under the screws on the side of the corner bracket. WWW.WAMBAMFENCE.COM...
- Page 10 VG24300 ASSEMBLY INSTRUCTIONS STEP 6: POST CAPS STEP 6.1 STEP 6.2 Insert the Pickets Use the Vinyl Glue to glue the Picket Caps the top of the pickets. STEP 6.3 Glue the Post Caps Completed gate. WWW.WAMBAMFENCE.COM...
- Page 11 VG24300 ASSEMBLY INSTRUCTIONS STEP 7: STEP 7.1 Fasten the Latch Finger WWW.WAMBAMFENCE.COM...
- Page 12 VG24300 ASSEMBLY INSTRUCTIONS GATE BRACE STEP 8: STEP 8.1 Assemble the Gate Brace STEP 8.2 Double check that the gate is WWW.WAMBAMFENCE.COM...
- Page 13 VG24300 ASSEMBLY INSTRUCTIONS GATE AND STEP 9: STEP 9.1 Align the gate to the horizontal fence rails. Both the fence & gate hori- zontal rail spacing can be adjusted to lower heights. STEP 9.2A Fasten the hinges to the posts as illustrated. See the next page for more details.
- Page 14 VG24300 ASSEMBLY INSTRUCTIONS STEP 9.2B as illustrated. Angle your drill slightly as illustrated. Swing the gate open and pre-drill four more holes for the hinge screws as illustrated. Top View Angle your drill to pierce into the angled illustrated. STEP 9.2C STEP 9.2D Repeat steps WWW.WAMBAMFENCE.COM...
- Page 15 VG24300 ASSEMBLY INSTRUCTIONS LEVEL GATE AND STEP 10: STEP 10.1 STEP 10.2 latching post. STEP 10.3 insert the into one of the holes on the hinge and rotate it to release tension on the WWW.WAMBAMFENCE.COM...
- Page 16 VG24300 ASSEMBLY INSTRUCTIONS STEP 11: STEP 11.1 Align and fasten the Latch Catch WWW.WAMBAMFENCE.COM...
- Page 17 VG24300 ASSEMBLY INSTRUCTIONS OVER A ALTERNATIVE APPLICATION: STEP 1.1 If the a temporary spacer. Proceed installing the panels according guide. Sidewalk/path OVER A ALTERNATIVE APPLICATION: STEP 1.1 If the Sidewalk/path mounts must be purchased separately and can be found by searching product Use the gate jig to ensure proper spacing.
- Page 18 VG24300 ASSEMBLY INSTRUCTIONS CUSTOMIZE WWW.WAMBAMFENCE.COM...
- Page 19 VG24300 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. hmmm@wambamfence.com 704-892-5222 877-778-5733 WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM...
Need help?
Do you have a question about the JIMINY PICKET VG24300 and is the answer not in the manual?
Questions and answers