HOMCOM 823-039V81 Assembly Instruction Manual page 6

− WARNING – Improper use of the grounding plug can result
in a risk of electric shock. Consult a qualified electrician or
service agent if the grounding instructions are not completely
understood, or if doubt exists as to whether the product is
properly grounded.
LCDI power supply cord and plug
The product is equipped with an LCDI (Leakage Current Detection
and Interruption) power cord and plug which senses leakage
current flowing between or from the cord conductors and interrupts
the circuit at a predetermined level of leakage current.
The TEST and RESET buttons on the LCDI plug are used to check if
the plug is functioning properly. To do so:
1. Plug the power cord into a wall outlet.
2. Press the TEST button. The circuit should trip,
RESET
TEST
3. Press the RESET button to restore power to the
If the TEST button is pressed and the product can still be turned
on, current leakage has been detected. Do not use the product or
attempt to reset the LCDI plug.
WARNING:
− DO NOT press the TEST button while the product is operating.
− The TEST and RESET buttons should not be used as "ON" and
"OFF" switches.
− The cord and plug are not intended to offer protection to
externally connected loads or supply circuits.
− The cord and plug are intended for indoor use only.
cutting power to the product.
product.
4