HOMCOM 823-039V81 Assembly Instruction Manual page 14

To Shift the unit between Celsius and Fahrenheit, hold
simultaneously when the appliance is on. The corresponding indicator of °C
and °F will light up.
4. Adjust Fan Speed
Press the to select a desired fan speed, as shown below.
5. Power
When you press
Notice:
Each mode working principle
● Automatic mode
1. Once the automatic operation is selected, the indoor temperature sensor
detects room temperature automatically - it will select the desired operation
mode or
2. When the room temperature ≥
mode.
3. When the room temperature ＜
mode.
● Dehumidify mode
1. The up centrifugal fan will run at a low speed. The speed cannot be adjusted.
2. The unit adopts a constant temperature during dehumidifying mode. You
cannot adjust the temperature.
3. If using the dehumidification for long periods, connect the drain hose to the
unit.
● Cool mode
1. When the room temperature is higher than set temperature, the compressor
starts to run.
2. When the room temperature is lower than set temperature, the compressor
stops and upper fan operates at original set speed.
● Fan mode
1. The fan runs at set speed - the compressor does not run.
2. The adjustment of temperature is not effective.
● Timer on and
1. Press 'Timer' while the unit is running, so the unit automatically turns off at a
certain time. The icon will be lit.
2. Press 'Timer' while the unit is on standby, so the unit automatically turns on
at a certain time The timer icon be lit.
3. The time can be adjusted between 1-24 hours. Press the temp up (+) or
temp down (-) button to increase or decrease the time one hour.
again, the unit will beep and turn off.
°C, the unit will automatically select mode.
75.2°F (24°C)
Timer off function
75.2°F (24°C)
, the unit will automatically select
, the unit will automatically select
12
and