K-array FIRENZE-KH7P I User Manual page 15

3. Pull out the 2x plates and the 8x pins situated at the back
of each KH7P I unit (dedicated rigging hardware).
4. Position the first unit vertically with the four rubber feet
facing downwards - the plates must be vertically oriented
with the printed arrow facing upwards
5. Fasten the four pins to secure the plates to the KH7P I
Never exceed the maximum weight limit
According to the load configuration.
Firenze-systems
6. Position the fly bar above the unit
7. Secure the fly bar to the plates with the other four pins
User Guide
15