Metra Electronics 95-7315 Installation Instructions Manual

For hyundai tucson 2005-2009

Download this manual

INSTALLATION INSTRUCTIONS FOR PART 95-7315

95-7315

KIT FEATURES

• DDIN Head Unit Provision

• ISO Stacked Head Unit Provision

KIT COMPONENTS

A) Double DIN Trim Plate • B) Double DIN Brackets

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

Harness: 70-7301 - KIA / HYUNDAI 1999-2008 Harness

Antenna Adapter: Not Required

Small Flat Blade Screwdriver /Panel Removal Tool • Phillips Screwdriver

1-800-221-0932

APPLICATIONS

Hyundai Tucson

2005-2009

TOOLS REQUIRED:

www.metraonline.com

Need help?

Do you have a question about the 95-7315 and is the answer not in the manual?

Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7315 APPLICATIONS Hyundai Tucson 2005-2009 95-7315 KIT FEATURES • DDIN Head Unit Provision • ISO Stacked Head Unit Provision KIT COMPONENTS A) Double DIN Trim Plate • B) Double DIN Brackets WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Page 2 95-7315 Dash Disassembly ....... . . 1-2 Kit Assembly ........3...
Page 3 95-7315 2005-2009 HYUNDAI TUCSON Disconnect the negative battery terminal to prevent an accidental short circuit. Remove screw cover from back side of shift knob and remove (2) Phillips screws. Lift straight up on shift knob to remove. (Figure A) Unclip and remove shift knob trim panel.
Page 4 95-7315 2005-2009 HYUNDAI TUCSON Remove (1) Phillips screw from bottom center of trim panel surrounding radio including a/c controls then unclip and remove panel. (Figure D-E) Remove (4) Phillips screws to remove radio. (Figure F)
Page 5 95-7315 DOUBLE DIN HEAD UNIT PROVISION/ STACKED ISO DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.Re-connect the negative battery terminal and test the unit for proper operation.
Page 6 95-7315 NOTES...
Page 7 95-7315 NOTES...