Extang TRIFECTA 2.0 Installation Sheet page 5

LIMITED LIFETIME WARRANTY
The cover, including as applicable any hardware kit (e.g., rails, clamps, and bows) and fabric, carries a limited lifetime
warranty. This limited warranty is subject to the following terms:
WARRANTY COVERAGE
This tonneau cover is warranted against defects in materials or workmanship. This warranty is void if the product has been
damaged in an accident, or due to neglect, unforeseeable use, improper installation, improper servicing, or other cause not
arising out of defects in material or workmanship.
WARRANTY IS NOT TRANSFERABLE
The warranty is to the initial owner purchasing the tonneau cover and it is not transferrable to a subsequent end user.
Proof of purchase may be required to enforce the warranty rights.
WARRANTY CONDITIONS
Failure to follow these warnings and care instructions will void the warranty:
n Clean with mild automotive soap and water only.
n Do not use conditioners that contain silicone or petroleum (e.g., Armor All
n
Tonneau cover must be secured at all points when vehicle is in motion. When not fully extended, cover must be
completely folded up and secured at the cab with the provided buckle straps and tethers attached. Do NOT drive
with the bed cover in a partially open position..
n Check front/cab clamps and retention mechanisms for tightness after a week of driving following installation (or
re-installation) of the cover and periodically thereafter.
n Before opening, cover must be free of all foreign materials including snow and ice.
n To avoid potential damage to the cover, panel clamps/latches must be in their stored positions prior to opening/folding
the panel.
n Do NOT tow your vehicle from the rear with the cover on your vehicle. If towing from the rear is required, the cover
MUST be removed from the vehicle and properly stored.
WARRANTY PERFORMANCE
If all warranty conditions are met, a defective tonneau cover, tarp, or hardware component will either be repaired or
replaced (at our option). We reserve the right, for any warrantied return, to substitute a newer model of tonneau cover
having similar form and function, to offer a warranty discount on an entire replacement system, and/or provide remedies
other than those mentioned in this document.
WARRANTY PROCESS
A Return Authorization number must be obtained from our Customer Service Department prior to returning any product.
We may require the original item to be returned postage prepaid for final determination. Shipping charges will apply for
any repair or replacement. Other than postage or shipping charges, no charge will be made for repair or replacement
under this warranty.
This warranty gives you specific legal rights. As an owner, you may also have additional rights and remedies under the laws
of your state.
Re-tighten the front/cab clamps and tethers after the first week of driving the vehicle.
Also periodically check the clamps and tethers to ensure they are secure.
Closed/Extended Position – Bed cover must be completely secured by all four (4) clamps.
Open/Folded Position – Bed cover must be completely folded up (all panels) and secured
at the cab with the provided buckles straps and with both tethers attached.
Do NOT drive with the bed cover in a partially open position.
Do NOT allow the vehicle to be towed
backwards without first removing the
cover from the vehicle.
Extang Corporation • 5400 S. State Road, Ann Arbor, MI 48108 • 800-877-2588 © Extang Corporation, 2022
IMPORTANT
Remove any snow or foreign matter
before folding the bed cover.
® ).
Part# 31920166-30 Rev. 6-27-22