INSTALLATION SHEET
Part # 7920, 2920
TuffKlamps™
NEW Improved
"DOUBLE HOOK"
Side Rail Clamps
Clamp Bolts
MISSING PARTS???
call Extang at
1-800-877-2588
Any and all needed parts will be shipped to you
directly. (DO NOT return whole kit to store)
PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.
1
Wash truck bed.
3
For Classic Platinum Only
ClickLock
TM
Pull back on the ClickLock
TM
release and remove one corner
from cab rail.
Extang Corporation
1901 E. Ellsworth Rd.
Ann Arbor, MI 48108
734 677-0444, Fax: 734 677-8409
Allen Wrench
IMPORTANT: Clean here with alcohol pad.
(Both Sides)
(This step does not apply to BlackMax)
Feed tarp dowel into cab rail.
(NOTE: For easiest feeding action, place tarp on a flat
smooth surface, and keep dowel straight while feeding
into cab rail. Caution, pavement may scuff tarp.)
GM C/ Che vy Ste ps ide '9 9–
Corner Pieces
Al coho l
Pa d
Reinsert corner piece into cab
rail until it "clicks" and locks
into place.
Tarp
Side Rails
Wall Plates
B
M
has snaps on all rails.
LACK
AX
2
Foam has NO adhesive to
touch truck finish.
Remove paper tape from all rails. Discard properly.
4
Off the truck bed, connect the
end rails to the two side rails.
www.extang.com
I t e m N o . 0 0 2 0 - 1 2 0 2 RH P r i n t e d i n U . S . A .
Bows
NOTE:
P L E A S E
D O N O T
L I T T E R
Visit us at:
Need help?
Do you have a question about the CLASSIC PLATINUM & BLACKMAX 7920 and is the answer not in the manual?
Questions and answers