Extang CLASSIC PLATINUM BLACKMAX TUFF TONNO III & Saber TONNO 14660 Installation Sheet

INSTAL LATI ON S HE E T-
Note:
Tuff Tonno III and
Saber Tonno have
no snaps on rails
or tarp.
"L" Brackets and 2 1/4"
long Screws
(4 sets)
PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.
1
Wash
truck
bed.
3
For Classic Platinum Only
ClickLock TM
Depress the ClickLock
TM
release and remove one corner
from cab rail.
Extang Corporation
1901 E. Ellsworth Rd.
Ann Arbor, MI 48108
734 677-0444, Fax: 734 677-8409
2
Remove
paper tape
from all
rails.
Discard
properly.
(This step does not apply to BlackMax)
Feed tarp dowel into cab rail.
(NOTE: For easiest feeding action, place tarp on a flat
smooth surface, and keep dowel straight while feeding
into cab rail. Caution, pavement may scuff tarp.)
GM/Chev y Composite Box
call Extang at
Corner Pieces
Any and all needed parts will be shipped to you
directly. (DO NOT return whole kit to store)
Allen Wrench
B
Foam has NO
adhesive to touch
truck finish.
P L E A S E
D O N O T
L I T T E R
Reinsert corner piece into cab
rail until it "clicks" and locks
into place.
Spring Bows
(x3-Short Bed)
(x4-Long Bed)
Tarp
MISSING PARTS???
1-800-877-2588
M has snaps on all rails.
LACK AX
bracket and use the
to insert the disk of
the "L" bracket into
inside the truck stake
Pull up on the screw
to secure the "L"
bracket FIRMLY into
the keyhole slot and
then remove the
screw leaving the "L"
bracket in place.
www.extang.com
I t e m N o . 0 0 0 9 - 1 0 0 2 P r i n t e d i n U . S . A .
NOTE:
Secure a 2 1 /4 "
screw into the "L"
screw as a handle
the keyhole slot
pocket (x4).
4
Visit us at: